Sanitized Pro for HOCL is a broad-spectrum, liquid disinfectant that contains no bleach, no harsh chemicals, is gentle enough to use around kids and pets, and is safe for use on all hard surfaces. Electrochemical activation takes brine water, sends it through specialty-designed production units, and adds electricity. This reaction causes the saltwater to separate into an anolyte solution and a catholyte solution.
"The anolyte solution, known as Sanitized Pro for HOCL, contains hypochlorous acid (HOCl) and water. The hypochlorous acid acts as a disinfectant and is the same chemical produced in our bodies by white blood cells to attack pathogens and fight infections.
Sanitized Pro for HOCL replaces chlorine disinfectants and other toxic oxidizing disinfectants. Sanitized Pro for HOCL is made from salt and water and was awarded a certification from the Organic Materials Review Institute (OMRI). Sanitized Pro for HOCL is also non-corrosive, non-flammable, and ready to use out of the bottle. Storage and spilling are not an issue since there are no harsh chemicals. No masks, gloves or special equipment is required. Sanitized Pro for HOCL naturally breaks down into a saltwater solution after degrading.
The production of Sanitized Pro for HOCL allows us to maximize the effectiveness of hypochlorous acid. Look at the chart below and see why hypochlorous acid is the most effective antimicrobial agent.
Microorganism
% Reduction
Kill Time
SARS-CoV-2 (COVID-19 virus)
>99.999%
1 minute
MRSA
>99.999%
2 minutes
Pseudomonas Aeruginosa
>99.999%
2 minutes
Salmonella Enterica
>99.999%
2 minutes
Escherichia Coli (incl. H157)
>99.999%
2 minutes
VRE
>99.999%
2 minutes
CRE
>99.999%
2 minutes
Listeria
>99.999%
2 minutes
H1N1 (Swine Flu)
>99.999%
10 minutes
Norovirus Feline
>99.999%
10 minutes
Norovirus Murine
>99.999%
10 minutes
Hepatitis A virus
>99.999%
10 minutes
Hepatitis B virus
>99.999%
10 minutes
Hepatitis C virus
>99.999%
10 minutes
HIV1
>99.999%
10 minutes
(TB) Mycobacterium Bovis
>99.999%
10 minutes
Candida Airus
>99.999%
10 minutes
Candida Albicans
>99.999%
10 minutes
C. Diff.
>99.999%
10 minutes
Canine Distemper
>99.999%
10 minutes
Staphylococcus Epidermus
>99.999%
2 minutes
Staphylococcus Aureus
(Soft Surface)
>99.999%
5 minutes
Klebsiella Pneumoniae
(Soft Surface)
>99.999%
5 minutes
Germicidal Sanitizing of
Staphylococcus &
E-coli E
>99.999%
30 Seconds
Sanitized Pro for HOCL
Chlorine
Dioxide
Sodium Hypochlorite
(Bleach)
Ozone
Isopropyl
Alcohol
Glutaralde
Hyde
Hydrogen
Peroxide
Kills bacteria
YES
YES
YES
YES
YES
YES
YES
Non-corrosive
YES
YES
Ready to use
YES
YES
YES
YES
YES
Deodorizer
YES
YES
YES
YES
YES
No cautions with storage
YES
Non-flammable
YES
YES
YES
YES
YES
No PPE required
YES
Easily disposed
YES
YES
Hypochlorous Acid 0.025% (active ingredient);
Hypochlorite Ion 0.00418% (inactive ingredient);
Ozone, Chlorine Dioxide, Chloric Acid, Chlorous Acid <0.0003% (inactive ingredients);
Water 99.77% (inactive ingredient);
Sodium chloride (salt) 0.2% (inactive ingredient).
Sanitized Pro for HOCL is a broad-spectrum, liquid disinfectant that contains no bleach and no harsh chemicals.
Sanitized Pro for HOCL (ECA) is effective because of the hypochlorous acid present in the solution. Hypochlorous acid is naturally produced by the human body to fight microbes. Hypochlorous acid also is the prime disinfectant ingredient in chlorine-based disinfectants, like bleach.However, bleach can have harmful side effects. ECA extracted only the microbe destroying agent in chlorine-based disinfectants, as it is naturally produced in the human body. ECA is effective at destroying microbes and is harmless to humans and warm-blooded animals.
In order to maximize the effectiveness of the hypochlorous acid, Sanitized Pro for HOCL produces ECA with a pH between 6 – 7. As seen in the graph below, when the anolyte water is produced at such a neutral or slight acidic state, hypochlorous acid mainly is present.
If we were to produce the anolyte solution at a more acidic pH, closer to 2.0, then more chlorine gas would be present. Chlorine gas is toxic and needs to be added to water to form the disinfecting agent. When chlorine gas is added to water, the risk of THM’s also are present, which pose a threat. Along with more risks to the manufacturer and user of this anolyte solution, lower pH anolyte solutions are corrosive, while near-neutral pH anolyte solutions are not corrosive.
If we were to produce the anolyte solution at a more basic pH, closer to 10.0, there would be more sodium hypochlorite than hypochlorous acid. Sodium hypochlorite is the main ingredient in bleach. While sodium hypochlorite does disinfect, it requires more strength and careful handling than hypochlorous acid.
The production of Sanitized Pro for HOCL allows us to maximize the effectiveness of hypochlorous acid. Look at the chart below and see why hypochlorous acid is the most effective antimicrobial agent.